2-in-1 Weatherproof Gutter Mount for Blink Outdoor (3rd Gen), Blink Outdoor 4(4th Gen) and Blink Solar Panel, Adjustable No Drilling Wall Mount, P...

I wanted to attach my Blink Gen3 camera and new solar panel to my gutter to capture a section of my yard from a higher view. I was happy to see a mount that would hold both. Getting the panel and the camera locked in place was tricky. For some reason, I had to keep re-tightening the screws and fighting to keep the panel from going wonky. It took 15 minutes longer than expected to get them hooked up. They held well once I got them in my preferred angles. Its easy to attach it to the gutter. All it takes is hand-screwing the two provided screws until its tight against the gutter. I plan to check on it periodically to make sure its not slipping or loosening for some reason. I love having a mount that holds both the solar panel and the camera. Serves my purpose wonderfully. Good, solid product.

This mount was just what I needed to get my solar panel out in the sun and out from under the soffit on my house without drilling holes in to the roof. It was easy to put together and holds the camera and panel great. It also eliminates having to run and hide a power cable from the camera to the panel very far since the camera mounts right below it.

I ordered this 2-in-1 Weatherproof Gutter Mount for Blink to use with one of the security cameras around my pool. I have a solar panel attached to it as well, and it just all looks messy. I figured this mount would clean things up a bit. I like this 2-in-1 Weatherproof Gutter Mount for Blink simply because it hold both my camera and solar panel. And attaching them to it is super simple. When everything all tightened down, it holds both the camera and panel securely which is important with all the high winds we get around here. Installing this mount on the gutter is a bit of challenge.just make sure you dont have the camera and the solar panel attached to it when you do itthey get in the way. Attaching the mount to the gutter is a real pain. The mounting screws end up being inside the gutter and tightening them down is very tricky and can be dangerous if there are sharp spots on your gutter. It takes some time to get it hooked securely. Once attached, this 2-in-1 Weatherproof Gutter Mount for Blink is also a bit challenging to adjust. The one screw knob tightens everything down. You have to gave your camera and panel both positioned where you.want them before you do it. Otherwise, youll be trying it again. This mounts seems pretty sturdy for bring aluminum. Its rather heavy in your hand. All in all, this 2-in-1 Weatherproof Gutter Mount for Blink is a decent integrated mount for your camera and panel. Its challenging to setup, but once you get it, it works fine.

Pros: Does both for the price of one. It mount the solar panel and also the camera. I have both blink 3rd and 4th gens. They fit perfectly! This helps reduce the cables. It is a nice addon to the gutter and better point of view as well. Cons: N/A

I got this because I wanted to move my blink camera higher so itll be able to record a larger area, but I didnt want to drill more holes and especially not on the roof for my solar panel. This was a great solution. Its easy to install. Just off the gutter and tighten the screws and thats it. You can attach a solar panel if you want or just run the power cable down. Works great.