Electriduct 1/2" Self Adhesive Hook & Loop Tape Adhesive Backed Fabric Fastener | Used for Arts/Crafts & Home and Office - 15 Feet...

I normally use 2" industrial strength 3m velcro, but I needed a lot of 1/2 inch pieces and in the past I have cut the velcro with a metal straight edge and utility blade, but was thankful to find this alternative to save the hassle and always have the smaller size available. I keep the hook side and the loop side in 2 different ziplock bags to not have to deal with them getting stuck and tangled in storage. I can't compare the adhesive quality with the 3m industrial strength, but I would guess it's not as string. However, it has not given me any problems. I clean the metal surface with alcohol, then after putting the strip on, I apply pressure, then heat it up with a hair dryer to soften the adhesive, then add more pressure while warm. This technique has worked well for keeping it from coming off the surfaces.

I purchase several things on ZeeBooth and was giving pretty in-depth reviews. From this point on, here's the new agenda. if it works as advertised, is well made, meets or exceeds the description, is a value, and arrives in a fair amount of time, it will get a "star rating" equal to what my expectations were/are. If it doesn't meet these criteria, then I will most definitely and descriptively tell the short comings of the products and you as a consumer will not have to go through the trouble of buying the product without some background knowledge. If the sell pulls that item and relists under another description, I will put the exact same review on the seller's feedback page. Sellers have done this a couple of times in the past, and I was true to my word then as well as now. DR

Very good adhesive. Worked great

I use this product for building guitar pedal boards, the adhesive is brutally strong, so be sure to know exactly where you want it to stick before pressing it into place. The hook/loop function has great holding power, even with the heaviest guitar effects, I even use it to hold cables, outlets, and power supply units in place underneath the pedal boards. Great product that gives good professional results.

Perfect width for my uses. Don't expect super strength out of 1/2" wide velcro, but still plenty holding power for what I am using it for. After 24 hours curing, the adhesion seems to be really good. While it is not holding much weight, i am constantly opening and closing the makeshift entrance. I did staple gun it to the OSB as well as the plastic covering with a normal stapler. So far, i don't see it lifting off the material anywhere. Some spots even have a mesh between the velcro strip and some wood. It surprisingly stuck through that well. While i'm sure the staples will be neccessary there, it is surprisingly affixed well in that area, nonetheless. Everything works as expected and of decent quality.