Plastic Mist Misting Nozzle Sprinkler Tee Joints for Misting Watering Plant Flower Cooling System Home Garden Irrigation, 20pcs...

I used these sprayers in my wife's Greenhouse. We tied them to a timer and they created a mist that covered every plant in the Greenhouse. They are GREAT !! We can travel and not worry about the plants receiving the water they need.

Not as fine of a mist I was looking for. Although they work good.

Great perfectly designed misting nozzles. They are easy to install using typical 1/4 inch irrigation tubing. Misting requires extremely tiny holes in the tip of the nozzle, which makes the nozzle susceptible to pluggage. The design of this nozzle for installation and removal by hand and no tools is about as perfect as possible. So IF any of them should plug, a twist of the nozzle counter clockwise will disengage the nozzle from the misting apparatus to be easily flushed under the kitchen sink faucet or replaced, with counterclock twist and walla the misting is back in service. I couldn't have found any other product that could have met my specification any better, and reasonably priced. There are metal misters that have to be screwed in PVC etc, not for me, because PVC is not flexible, can't be just wrapped around etc. I used these to wrap around my AC outside unit, and sourced the water through a solonoid control valve. The valve opens and closes providing the misters with water only when the AC compressor is energized. It's a great system and the misters nozzles made all the difference in entire project.

Worked out great for a small greenhouse I had built. Unfortunately the connections were larger than 1/4 inch and wasnt able to get them to fit into the 1/4 inch tubing without filing down the ends. Overall easy fix. The spray from the nozzles is just the right amount and work perfectly.

Works great!! I used with 1/4 inch aquarium tubing. Nozzles do not leak at the dripper or at the tube connection. I don't have a very forceful spray so I can't say how much psi it can handle and I only used one nozzle, not several in a series.