3/8 Inch Pressure Washers Male Nipple - 2PCs 3/8 Inch Male NPT Pressure Washer Plug...

Fcil de usar y con muy buen material su construccion. Buena variedad de chorro de gua para fcil lavado. Lo recomiendo

Great value

This review is for the CLIO brand 4 Pairs of NPT 1/4 Inch Pressure Washer Quick Connect Couplers. I'm adapting my pressure washer to do more things, and having quick connect couplers makes it much easier to switch between different tools, such as a sand blasting pressure washer wand, and other wands. I'm an amateur machinist and the machining on these couplers is first rate. The threads are formed well, which means they will perform well. Just be careful when ordering, as there are different sizes. The quick connect come in 1/4-inch and 3/8-inch, and the threaded portion on these is 1/4-npt (npt = national pipe thread). Also be aware that reviews below a specific product aren't always for the exact product that appears to be being reviewed, and a lot of people order the wrong size by mistake. In addition to the two sizes of quick connect fittings, there are a few sizes of threaded fitting (1/4-npt, 3/8-npt, and 1/2-npt). There are also pressure fittings that use o-rings and come in 15mm or 14mm. ZeeBooth has many different ones from which to choose. So, with a little care, you can figure out which quick-connect size you need, then look at what you already have and need to connect to, and figure out if you need threaded fittings (make or female) or o-ring fittings, and then figure out what size you need. Take it one step at a time, look at the photos of fittings on ZeeBooth, and you will be able to order the right fitting easily.

Review for: CLIO 3/8 Inch Pressure Washers Male Nipple - 2PCs 3/8 Inch Male NPT Just what I was looking for. My pressure washer is about 15 years old, but is still going strong for use around the house (Honda GX200 & a Cat Pump is a great combination). The fittings were showing their age, however, and it has become harder and harder to connect/disconnect the hose and gun. So I ordered these 3/8" male NPT plug sets, and they work perfectly. My pressure washer came from the factory with two quick disconnects on the hose, so it does not matter which end gets connected to what, which can really be helpful at times. So these fittings are for the gun and the pressure washer pump. They appear to be well-made out of stainless steel and certainly a nice upgrade. These are for use with a 3/8" hose. Would recommend

I ordered these for my pressure washer hoses. These hoses are 1/4, but the connections are M22 which I learned are standard in US for pressure washer hoses. I should have done more research before I ordered these, my bad. All is not lost though. I gave them to my husband to use with his air tools. He says they will fit well.