Kalolary 50 Pairs Misting Drippers Head, Atomizing Sprinkler with Tee Joints Adjustable Equipment Tool Micro Sprinkler Shrub for Flower Bed Patio,...

Awesome mister heads for building a diy hp aeroponic setup. I've tried tons of different ones and they were all terrible, they clogged constantly and caused tons of problems. These ones here are awesome, no clogs, insane mist pattern, they basically vortex the mist its pretty sick. If your building a aeroponic unit definitely buy these. Put it this way they are so good I'm writing a review and I never do reviews. By they way no need to use the tees cause u can just stick 1/4 inch od line directly into sprayer. A++

These are poor quality.. the spry diameter is very tight .. you have to install a head every 2-3 inches

My first bag of spray heads were locked up. I had to carefully use a wrench to remove each cap, clean the threads, then reassemble the whole bag, and they are still sticky. When I goty second bag, I realized cleaning was unnecessary because the spray heads are preset for misting.

These things are really awesome. As it turned out they were the best application for my raised beds as the other sprinkler types didn't work well. These mist a gallon of water every 21 minutes under a 25 PSI regulator. The first time I ordered them I got a set that had a red atomizer under the gray head. They seem to pop off easily, and some of them wouldn't really atomize the water but more shot it several feet in a single stream, lol. The second time I ordered, it seems as though they improved on the design. The orange atomizer is thicker and sits further into the nozzle and doesn't pop off as easily as the red ones do. The mist is also finer, even though it still puts out at the same one gallon every 21 minutes. The parts and pieces are also not interchangeable. So make sure you get the ones that have the orange atomizer under the gray head.

Other reviewers are right. There are some irregularities on the "T" connectors. Some are super tight and some are loose. Need to check the next day after installation. I had one where the head flew off the "T" (Yes, there is no lock for it to hold on). I matched and inserter each pair before I even install it. My mistake is that I should have super glued the loose ones prior to install. I have no idea why they have to make it a 2 piece set. I also plug one of the "T" opening with a 1/4" hose with plug for a single hose line misting at the end. Changed my review to 5 stars instead of 4--because I realized why they made it 2 piece, because if you remove the T, the sprayer tip fits snugly tight to the 1/4" hose for end or single spray setup. TIP: A bonus that I discovered: Instead of the "T" connector, the rainbird 1/4" hose fits snugly tight. I mentioned rainbird brand because that is the hose I got (has a rough surface that I can even glue it if I want). It is tight enough that I think is sufficient maybe even tighter than the T connector where it came from.