Pressure Washer Hose Swivel Joint, M22 14mm Anti Twist Fitting, 3000 PSI...

When I received it, the swivel joint wouldn't budge, but when I installed it on the gun and connected the hose, it expanded and swivels without hesitation.

This pressure washer adapter is to let the pressure hose be ale to spin, so the hose does not kink. You can manually unwind or unkink the hose without having to spin the whole hose and nozzle at once. The package comes with the adapter and two rubber washers.

I am a regular user of pressure washers for tasks around the house. One of the petty annoyances I have found is having to uncurl/unkink the hose as I move around a vehicle when being washed or when using a surface cleaner on concrete. Saw this swivel fitting and thought for the price it was worth trying out. So far in very limited use (3 times) it has performed as described and made using the pressure washer much less frustrating. Although brass in color, seller describes it as brass material so I do not believe it is 100% brass. However, the machining and finish are very good and I did not detect any flaws. The swivel itself feels solid in the hand. The hex surfaces to install/remove the fitting are sized well and seem robust. The threads are well cut - M22 x 14 for standard gas pressure washers. May or may not fit if you have an electric pressure washer as some brands use 15mm threads. Check your unit before ordering. When I measured the part, the overall dimensions of the swivel are as listed by the seller. Came with two washers but one was defective (see photo). I have plenty of spares on hand so no issue for me and the fitting only needs one to put into service so did not cause any problem. If you own/use a pressure washer you should purchase and assortment of washers and o rings sized to your equipment as these are wear parts and will need to be replaced from time to time under the best of circumstances. Seller claims it is rated up to 3000 psi but my largest pressure washer tops out at 2800 psi so I could not directly test this claim. Can say that in the three times I have used it there were no leaks at the threads or at the swivel. One thing of note, when it first arrived the swivel was so tight I could not turn it by hand. Had to loosen it up with a crescent wrench. Still pretty tight in service but better that than leaks. I would expect it will loosen up over time with use. My only real concern is the size of the orifice through the fitting. I measured it at only .21 inch which is a not insignificantly smaller diameter than the pressure hose and its fittings that connect to it. However, did not notice any drop in pressure or volume of water in the times I have used it so far. If this changes I will update. Too soon to comment/rate longevity or durability in use. Will try to come back after a full summer of use and opine on these points. For now, am fully satisfied. Product true to seller description, does what is expected of it, and appears to be a good value relative to quality of construction. Having had no problems or concerns in my limited use, will rate the item as five stars at this time. Not deducting any for the defective washer as it did not stop me from using the swivel upon delivery.

instant leaking and i had to remove it